There are two types of circuit breakers provided, draw-out and molded case.

The circular symbol can be used as a relay symbol or as a note symbol on your one-line diagram.

The contact family includes two types, normally open and normally closed. Upon activation (relay coil powered), the corresponding contact will switch positions.

A current transformer and potential transformer are provided for use with relays and other purposes.

There are two types of disconnect switches provided, a fused disconnect and a non-fused disconnect.

There are two types of fuses provided, a breakaway fuse and a normal fuse.

There is only one ground type symbol built-in to the family.

There is only one high voltage termination symbol built-in to the family.

There is only one overload symbol built-in to the family.

There is only one potential transformer symbol built-in to the family. These can be connected to your relays.

There are two push button switches built into the family, push to open and push to close.

A rectangular symbol can be used for miscellaneous equipment.

A square symbol can be used for miscellaneous equipment.

There is only one starter symbol built-in to the family.

There is only one surge arrestor symbol built-in to the family.

There is only one transfer switch symbol built-in to the family.

There is only one transformer symbol built-in to the family.